A community post says Kate used voltage fault injection to unlock the mining card’s fused-off memory and enable additional working SMs, producing a card with 80GB usable for inference.
Key points
The mod required board wiring and a custom STM32 glitcher
Glitching took 1 to 48 hours per card
One of Kate’s ten cards had only 64GB of intact memory
The r/LocalLLaMA post reports that Kate used voltage fault injection to bypass a fuse lock on an 8GB CMP 170HX mining card. It says software-only attempts had previously enabled up to 64GB, while the voltage-glitching method made the full 80GB available for inference.
According to the post, the modified card had 120–126 working SMs, compared with 108 in a retail A100. Kate’s reported FP16 performance was 85.9 TFLOP/s, versus 72.5 TFLOP/s for the retail card; NVLink and PCIe Gen4 also reportedly worked.
The process involved wiring changes and a custom STM32 glitcher, and took between one and 48 hours per card. The post says one of ten cards tested had only 64GB of intact memory.